Construction glue for repairing damaged plastic and other materials. Effectively repairs, for example, cracked bumpers and car mirrors, various plastic parts and other elements. Works on bonded surfaces. The product creates a very durable flexible joint, resistant to temperatures up to 120°C. Withstands more than 270 standard atmospheres. The product is resistant to automotive, gear and hydraulic oils, gasoline, water and many other substances. HOW TO USE: 1. Clean and degrease the surfaces to be repaired, then dry. 2. To get the desired result, use sandpaper or a file to roughen the surface. 3. Remove the protection from the applicators and squeeze an equal amount of the mixture from each tube and mix well until a uniform gray color is obtained. 4. Apply the prepared mass to the repaired surfaces. 5. Within 3-5 minutes, place the elements you want to join, and then press firmly for at least an hour. 6. The curing process takes longer if the ambient temperature is below 5°C. 7. Remove excess glue with a towel or rag dipped in thinner. 8. After use, fasten the tubes with the attached cap.