Epoxy metal glue MA Professional is a fast-hardening epoxy steel mass for repairing damaged/cracked objects made of various metal alloys, wood, ceramic products, plastic products and many other materials. The product creates a very strong bond, resistant to temperatures up to 150 C and is resistant to engine, transmission and hydraulic oils, petrol, water and many other substances. Initial cure after 4-10 minutes depending on ambient temperature. After one hour, the product hardens by 80%. Complete hardening occurs after 24 hours. HOW TO USE: 1. Clean and degrease the surfaces to be repaired, then dry. 2. To get the desired result, use sandpaper or a file to roughen the surface. 3. Remove the protection from the applicators and squeeze an equal amount of the mixture from each tube and mix well until a uniform gray color is obtained. 4. Apply the prepared mass to the repaired surfaces. 5. Within 3-5 minutes, place the elements you want to join, and then press firmly for at least an hour. 6. The curing process takes longer if the ambient temperature is below 5C. 7. Remove excess glue with a towel or rag dipped in thinner. 8. After use, fasten the tubes with the attached cap.